Crystal Engineering 30 Series Calibrator Gauge

Crystal Engineering 30 Series Calibrator Gauge

The 30 Series is a wide range pressure calibrator that fits easily into a shirt pocket with 0.05% of reading accuracy.

Calibration tool box in the palm of your hand!

The 30 Series is a wide range pressure calibrator that fits easily into a shirt pocket with 0.05% of reading accuracy. There are no external transducers! Everything is built in! There are two models to choose from: Model 31s have one sensor, while Model 33s have two sensors.

 *ATEX version is optional

Accuracy
0 to Full Scale: ±(0.05% of Reading + Floor Term*)
*Floor Term = 0.005% of FS or display resolution, whichever is greater.
Vacuum: ±(0.25% of Reading + Vacuum Floor Term*)
* Vacuum Floor Term (VFT):
For 16 and 36 PSI, VFT = 0.004 PSI
For 300 PSI, VFT = 0.01 PSI
For 1 or 2 bar, and 100 or 200 kPa, VFT = 0.03 kPa or 0.0003 bar
For 20 bar or 2000 kPa, VFT = 0.1 kPa or 0.001 bar

Vacuum operation is not specified for 600 PSI (40 bar/4000 kPa models and higher. However, all models can be safely connected to vacuum.
(Not recommended for continuous use at high vacuum.)

Temperature
Operating & Compensated: 0°C to 50°C (32°F to 122°F).
Storage: -20°C to 70°C (-4°F to 158°F).

Electrical
Range: 0 to 55 mA
Resolution: 0.001 mA
Accuracy: ±(0.025% of Reading + 0.001 mA)
Percentage Conversion: 4 mA = 0.00%; 20mA = 100.00% or 10 mA = 0.00%; 50 mA = 100.00%

Intrinsic Safety
Exia Intrinsically Safe, Class I, Groups A, B, C & D, Temperature code T4

*ATEX version is optional

Other Certifications 
DNV classification certifies all materials, components and systems relevant to the safe operation and quality of ships.

Connections
Pressure connection: 1/8" female NPT.
Electrical connection: 4mm jacks, 19mm (0.75") spacing.

Media Compatibility
Liquids and gases compatible with PTFE (Polytetrafluoroethylene) penetrated and anodized aluminum sensor manifold, 316 stainless steel (sensor), PTFE can be eliminated, if required, by specifying option SPSS, in which case aluminum manifold(s) will be replaced with stainless steel manifold(s).

Note: Over-range occurs at 110% of full scale, causing "HP Over" or "LP Over" to be displayed.

Standard factory setting is 1"H2O = 0.036126 PSI (density of water @ 4°C). Specify at time of order if you require a different density (e.g., for water @ 68°F, 1"H2O= 0.036063 PSI).

Power
Battery: One 9V battery.
Battery life: 90 hours typical (alkaline battery).
Low battery indicator: Displayed battery icon.

Enclosure
Description: Extruded Aluminum with sealed membrane keypad.
Dimensions: 29mm (1.15") D x 70mm (2.75") W x 130mm (5.4") L
Weight: Model 33: 400g (14.0 oz), Model 31: 342g (12.0 oz),
Model 31(1500 PSI and above): 360g (13.0 oz)

Sensor
All welded stainless steel sensor

Pressure Ranges

Pressure Ranges Pressure Units and Resolution
PSI bar kPa1 Over
pressure
PSI kg/cm2 Inch Hg inch H2O mm Hg cm H2O mm H2O kPa MPa mbar bar
162
13 & 4
1004
6.5x
0.001
0.0001
0.001
0.01
0.01
 
1
0.01
 
0.1
0.00014 
362
23 & 4
2004
3.0x
0.001
0.0001
0.001
0.01
0.01
 
1
0.01
 
0.1
0.00014 
300
20
2000
2.0x
0.01
0.001
0.01
0.1
0.1
1
 
0.1
 
 
0.001
600
40
4000
2.0x
0.01
0.001
 
 
 
 
 
0.1
0.0001
 
0.001
1500
100
10000
2.0x
0.1
0.01
 
 
 
 
 
1
0.001
 
0.01
3000
200
20000
1.5x
0.1
0.01
 
 
 
 
 
1
0.001
 
0.01
5000
300
30000
1.5x
0.1
0.01
 
 
 
 
 
1
0.001
 
0.01

1- kPa versions are restricted to kPa, MPa, bar and/or millibar, depending on pressure range. 
2 - PSI versions with ranges of 36 PSI and lower include all possible scales except bar. 
3 - Bar versions with ranges of 2 bar and lower include all scales except inch Hg, cm H2O and MPa.
4 - Applies to bar and kPa version only. 

        Second Pressure Range ATEX ONLY
        300 PSI 600 PSI 1.5K PSI 3K PSI 5K PSI
        20 bar 40 bar 100 bar 200 bar 300 bar
        2K kPa 4K kPa 10K kPa 20K kPA 30K kPa
First Pressure Range            
16 PSI 1 bar 100 kPa  
x
x
x
x
x
36 PSI 2 bar 200 kPa  
x
x
x
x
x
300 PSI 20 bar 2K kPa  
n/a
n/a
x
x
n/a

Please visit Industrial Process and Sensor for more info.

Back to Product List