The transmitter is ideally suited for challenging corrosive or waste liquids and is typically selected for atmospheric bulk storage and waste sump applications.
| Range: |
6" to 24.5' (15cm to 7.4m) |
| Accuracy: |
±0.25% of span |
| Resolution: |
0.125" (3 mm) |
| Beam width: |
8° conical |
| Dead band: |
6" (15 cm) |
Display type: |
LED, 4-digit |
| Display units: |
Inch or cm |
| Memory: |
Non-volatile |
| Supply voltage: |
14-36 VDC |
| Consumption: |
200mA max. |
| Current flow: |
Source/sink |
| Signal output: |
4-20 mA, three-wire |
| Signal invert: |
4-20 mA, 20-4 mA |
| Calibration: |
Push button |
| Contact type: |
(1) SPDT relay, latching |
| Contact rating: |
250 VAC @ 10A |
| Contact logic: |
Single point: alarm Two point: latching |
| Contact fail-safety: |
Reverts to safe state during echo-loss |
| LED indication: |
Relay status |
| Process temp: |
F:
-20° to 140° C: -4° to 60° |
| Temp. comp.: |
Automatic |
| Ambient temp: |
F:
-40° to 140° C: -40° to 60° |
| Pressure: |
30 psi (2 bar) @25° C., derated @1.667 psi (.113 bar) per °C. above 25° C. |
| Enclosure rating: |
NEMA 4X (IP65) |
| Encl. material: |
PP, UL94VO |
| Trans. material: |
PVDF |
| Cable jacket mat.: |
Vinyl |
| Cable type: |
Pow./signal: 3-conductor Relay: 3-conductor |
| Cable length: |
9" (22 cm) |
| Process mount: |
2" NPT (2" G) |
| Mount. gasket: |
±
Viton® |
| Conduit entrance: |
Single, 1/2" NPT |
| Classification: |
General purpose |
| CE compliance: |
EN 61326 EMC EN 61010-1 safety |
Please visit Industrial Process and Sensor for more info.