Honeywell 1000 Series Pressure Switches

The Honeywell 1000 Series:

Features: Low set point: actuates at 20 psi
• Reduced part count
• High burst rating (for high cost-of-failure applications)
• Banjo bolt fitting
• Sealed to IP65
Benefits: Small, low-cost switch actuated by hydraulic fluid or gas. Excels in harsh environments such as extreme weather conditions or particle-filled areas. Applications include Small vehicle brake light actuation, compact agricultural tractors, utility vehicles, trucks and lift trucks, and small self-propelled vehicles.

Characteristic	Parameter
Type	Direct acting
Circuitry	Normally open
Connector size	M10 x 1.25 banjo fitting
Terminals	6,3 mm [0.25 in] blade
Set point	20 psi ±10 psi [1,37 bar ±0,69 bar]
Operating pressure, max.	1200 psi [82,74 bar]
Proof pressure	2400 psi [165,47 bar]
Burst pressure	4800 psi [330,95 bar]
Operating temperature	-40 °C to 121 °C [-40 °F to 250 °F]
Operating media	DOT 3 or 4 brake fluid
Electrical rating	12 Vdc with two-1157 bulbs (4.4 A)
Contacts	Silver plated copper
Diaphragm	EPDM
Housing	Rynite 545 glass filled
Base	Trivalent plated steel
Spring	17-7 PH stainless steel
Connector options	M10 x 1.25 double banjo; M10 x 1, 1/8-27 NPT