Honeywell Pressure Transducer: | Model 424 |
Performance | |
Characteristic | Measure |
Pressure ranges | 0 psi to 5000 psi; 0 psi to 6000 psi; 0 psi to 10000 psi; 0 psi to 15000 psi; 0 psi to 20000 psi |
Accuracy1 | ±0.2%bestfitstraightline |
Calibration | Five-pointcalibration:0%,50%,and100%offullscale |
Output | 4 mA to 20 mA, two-wire full scale |
Resolution | Infinite |
Enviromental | |
Characteristic | Measure |
Temperature, operating | -43°Cto93°C[-45°Fto200°F] |
Temperature, compensating | -34°Cto82°C[-30°Fto180°F] |
Temperature effect, zero | 0.018%fullscale/°C[0.01%fullscale/°F] |
Temperature effect, span | 0.018%reading/°C[0.01%reading/°F] |
Temperature effect, sealing | HermeticallysealedIP68/NEMA6P |
Electrical | |
Characteristic | Measure |
Supply voltage | 9 Vdc to 28 Vdc |
Output(std) | 4 mA to 20 mA (two-wire) full scale |
Insulation resistance | >100MOhm@50Vdc |
Max. loop resistance | 950ohm@28Vdecreasinglinearlyto0ohm@9V |
Circuit protection | Reverse polarity protection of supply leads |
RFI/EMIprotection | Noise immunity from 5000 Hz to 1 GHz |
Frequencyresponse | Customer specified and factory installedfilterforfrequencyresponseof min. 10 Hz to max. of 2500 Hz (1.4 x 10-4 s) |
Electrical termination (std) | Standardelectricaltermination:4-pinMS3102 connector designed in stainless steel specifically for the oil and gasindustry; offer full hermetic sealing and direct “Glenair†connector compatibility |
Mechanical | |
Characteristic | Measure |
Media | Corrosive and abrasive service |
Overload,safe | 150%ratedfullscalepressureorlimitofWECO2202fitting |
Overload,burst | 250%ratedpressureorlimitofWECO2202 fitting |
Pressure port | WECO2202wingunion,51mm[2in]pipe, male sub end |
Wetted parts material | Inconel X-750 |
Weight | 2722g[6lb] |
Case material | 316Lstainlesssteel(labelsareweldedstainless steel with embossed characters) |