Series 16C Temperature Controller offers temperature measurement and control in a 1/16 DIN package. For direct or reverse acting (cooling or heating) control, Series 16C can be programmed for simple ON/OFF or more complex PID control functions.
Series 16C 1/16 DIN Temperature Controller
Thermocouple and RTD Inputs, Auto-Tuning, Dual Display RS-485 Communications
The compact Series 16C
Temperature Controller
offers accurate temperature
measurement and control in a 1/16 DIN package. Designed for direct or
reverse acting (cooling or heating) control, the Series 16C can be
programmed for simple ON/OFF or more complex PID control functions. PID
control is supported with manual or autotuning. Select relay, voltage or
current output for control methods.
The Series 16C accepts a variety
of thermocouple and RTD inputs. Process value and setpoint value are displayed
simultaneously on the large dual LED. Auto-tuning, engineering units (°F or °C),
and alarm status is also indicated on the faceplate. Two alarm outputs are
included on the unit with 12 preprogrammed alarm functions.
FEATURES:
Inputs: Thermocouple. RTD's, see Chart
Display: Two 4-digit, 7 segment .25" H LED's, PV,:red, SV: green
Supply Voltage: 100 to 240 VAC, 50/60 Hz.
Accuracy: ±0.25% Span
Operating Temperature: 32 to 122°F
Control Output: 4 to 20 ma, Relay: SPST, 5A, Voltage Pulse: 14V
Communications: RS-485 Modbus® A-5-11/RTU Communications protocol
Memory Backup: Nonvolatile memory.
|
|
|
Please visit Industrial Process and Sensor for more info.