The Series 4C can be programmed for simple ON/OFF or PID control functions. PID control is supported with manual or auto-tuning. Select relay, voltage pulse, or current output control. The controller also includes two additional alarm outputs.
Series 4C 1/4 DIN Temperature Controller ON/OFF
or PID Control
Thermocouple and RTD Inputs
Auto-Tuning, Dual Display RS-485 Communications
The Series 4C Temperature
Controller offers
easy-to-use programming menus designed for quick installation. The unit is
designed for direct or reverse acting (cooling or heating) control. The Series
4C can be programmed for simple ON/OFF or more complex PID control functions.
PID control is supported with manual or auto-tuning. Select relay, voltage
pulse, or current output control methods. The controller also includes two
additional alarm outputs. The alarm outputs can be configured from 12 different
preprogrammed settings.
The temperature controller accepts
a variety of thermocouple and RTD inputs. The process value and setpoint value
are displayed simultaneously on the large dual LED. Auto-tuning, engineering
units (°F or °C) and alarm status is also indicated on the faceplate.
FEATURES:
Inputs: Thermocouple. RTD's, see Chart
Display: Two 4-digit, 7 segment .25" H LED's, PV,:red, SV: green
Supply Voltage: 100 to 240 VAC, 50/60 Hz.
Accuracy: ±0.25% Span
Operating Temperature: 32 to 122°F
Control Output: 4 to 20 ma, Relay: SPDT, 5A, Voltage Pulse: 14V
Communications: RS-485 Modbus® A-5-11/RTU Communications protocol
Memory Backup: Nonvolatile memory.
|
|
|
Please visit Industrial Process and Sensor for more info.