PIE 434 Loop Calibrator / Read and source mA Signals / Troubleshoot Loop Problems with Patented Loop Diagnostic Technology
PIE Model 434
Calibrate milliamp (mA) loop functions
Source 0.00 to 24.00 mA (-25.0% to
125.0%)
Read 0.00 to 52.00 mA (-25% to 300.0%)
Simulate 2-Wire Transmitters 0.00
to 24.00 mA
Power and measure 2-Wire Transmitters
0.00 to 24.00 mA
Accuracy
to 0.025% of span at 4.000 & 20.000
Within ± 0.005 mA from 4.00
and 20.00 mA EZ-Checks
Locate Loop Current
Leakages
Automatic indication of Loop
Current and Leakage Current.
Measure ground current leakage from faulty
wiring, flooded conduit
and corrosion bridges. Leakage appears as a
Zero Shift and helps you
decide if the transmitter needs calibration or if there is some
problem
in the loop wiring.
EZ-Dial knob
Easily adjust output by 0.01 mA (0.01%)
EZ-Check 3-position
slide switch
Instantly output 4.00 OR 20.00 mA
calibration values
Adjustable in all three positions
for easy valve testing and
actuation
Rugged, unbreakable with splash protection
Uses 4 standard
“AA” alkaline batteries
Battery life up to 70 hours of normal
usage
Easily accessible battery compartment
Overload protected
135 vrms Protection
Fuse-less Protection from accidental
misconnection or misuse
Compact, lightweight and
rugged
Small in size with heavy protective
rubber boot
Rechargeable battery option available
1 hour rapid charger with four (4)
NiMh Batteries. Kit includes
an AC adaptor and a car adaptor for
charging on the go.
Please visit Industrial Process and Sensor for more info.