Trans-P Series TS Sumersible, Liquid-Level Transmitters

TS Series Submersible, Liquid-Level Pressure Transmitters with Vented strong submersible cable. Submersible to 1000 ft.. Tank Level, well level, municipal and industrial applications requiring watertight protection. 4-20 mA or Voltage Output

TS Series Submersible, Liquid-Level Transmitters

• 0.1% or 0.25% high accuracy, for hydralics, lab, test or wherver high accuracy is required.

• Accurate Level Measurements from 5" WC to 300 psi

• 4-20 mA or Voltage Output

• Vented, Strong Submersible Cable

• Lightning, short circuit, reverse polarity protection

• Compatible with Reotemp DM series Digital Indicators

• NEMA 6/IP68 protection, submersible to 1000 ft.

Applications:

Tank level, well level; municipal and industrial applications requiring watertight protection.

TS series transmitters are compatible with Reotemp DM series digital indicators (p.9). Each Reotemp transmitter is inspected and calibrated prior to shipment, to ensure it is 100% "Readyt o-Go" right out of the box!

Specifications: (Also see General specs)

Output Signal: 4-20 mA, 2 wire (std) 0-5 V, 0-10 V, or .5 - 2.5 VDC (3 wire)

Pressure Ranges: 0-2PSI thru 0-300PSI

Proof Pressure: 2 X Range

Burst Pressure: 4 X Range

Accuracy (BFSL): +/- 0.25% of span (standard), +/- 0.1% of span (optional) (incl. repeatability, hysteresis, and linearity):

Temperature: Compensated: +32 to 175 deg F, Effect: +/- 0.01% of span / deg F, Media: -22 to 212ºF (-30/100C) Ambient: -40 to 175ºF (-40 to 80ºC)

Environmental Protection: NEMA 6, IP68 (submersible to 1,000 ft.)

Electrical Protection: Reverse polarity, short circuit, and lightning protection.

Submersible Cable: Vented, watertight, polyurethane jacketed. Tensile strength: maximum 220 pounds

Wetted Parts: Body – 316 & 304 stainless Cable – polyurethane Nose cone – Polyamide

All product configurations are not list on the web site, only the most popular. If the product or option that you need is not listed. Please call IPS at 618-465-7623 to order the item.

Diaphram Seals are useful to protect the sensor from the process media (chemical, abrasives, viscous, or crystallizing) and protect the process from the sensor (sanitary, high purity,clean-out applications). Because of the many application considerations, IPS asks that you call us to assist you in identifying the proper diaphram seal for your application.

Please visit Industrial Process and Sensor for more info.

Back to Product List