Standard V6 with BRASS Housing, with SPDT Switch.
Series V6 Flotect® Flow Switch is engineered to specifically monitor liquid, gas, or airflows. Operation is simple and dependable with no mechanical linkage as the flow switch is magnetically actuated.
Standard V6 Series Flotect® Flow Switch
Brass Housing with SPDT
Snap Switch
Economical and Dependable Flow Switch
Monitor Flow in 1/2" to 2" Pipe
Explosion Proof & Leak Proof Body
|
Surprisingly compact, the
Series V6 Flotect® Flow Switch
is engineered to
specifically monitor liquid, gas, or airflows. Operation is simple and
dependable with no mechanical linkage as the flow switch is magnetically
actuated. The lower body holds the flow vane and one magnet, which
controls the switch actuating magnet in the separate upper housing. In
most applications the switch is normally off with the pipeline flow
forcing the vane against the vane spring. As the flow decreases the vane
spring pushes back the vane, actuating the switch to signal an alarm or
shutdown. Tees are available for installation in pipelines from 1/2˝ to
2˝, with bushings added the unit is easily adapted to 1/4˝ and 3/8˝
piping. |
|
FEATURES
-
Service: Liquids, Air or Gases
-
Choice of models in a tee with calibrated vane or field
adjustable trimmable vane
-
Wetted Material :Check Model Number
-
Switch Type: SPDT snap switch standard, DPDT snap Switch
Optional.
-
Leak Proof lower body machined from bar stock
-
Enclosure: Explosion and Weather Proof
-
Pressure Ratings: High pressure rating of 1000 psig with brass
body and 2000psig on the 316 body
-
Conduit Connection: 3/4" Male NPT Standard, 3/4" female NPT on
junction box models
-
Process Connection: 1/2" male NPT on models without Tee's.
|
|
Available Standard V6 Series Flotect® Flow
Switch
Models & Construction Matrix
| Example |
V6 |
B |
EP |
B |
S |
2 |
B |
MT |
V6EPB-B-S-2-B-MT flow switch; brass
upper housing, brass lower housing, brass tee with 3/4" NPT
connections, SPDT snap switch, and high temperature option
|
| Series |
V6 |
|
|
|
|
|
|
|
Series V6 flow switch |
| Construction |
|
EP |
|
|
|
|
|
|
Explosion proof |
| Upper Body |
|
|
B
S |
|
|
|
|
|
Brass
Stainless Steel |
| Lower Body |
|
|
|
B
S |
|
|
|
|
Brass
Stainless Steel |
| Circuit (Switch) |
|
|
|
|
S
D |
|
|
|
SPDT
DPDT |
| Tee Connection Size |
|
|
|
|
|
1
2
3
4
5
6
LF |
|
|
1/2" NPT
3/4" NPT
1" NPT
1-1/4" NPT
1-1/2" NPT
2" NPT
Low Flow Model (1/2" NPT connections) |
| Tee Material |
|
|
|
|
|
|
MI
FS
B
S
0 |
|
Iron
Forged Steel
Brass
Stainless Steel
No tee, field trimmable vane
(For LF Model no tee material chosen, tee material matches lower
housing choice) |
| Options:
Please Call IPS
618-465-7623
to Order |
|
|
|
|
|
|
|
CSA
AT
MV
MT
VIT |
CSA approved
construction with junction box*
ATEX approved construction with junction box
Gold contacts on snap switch for dry circuits (see specifications for
ratings)
High temperature option rated 400°F (205°C) (see specifications for
ratings)*
Fluoroelastomer O-rings in place of Buna-N on low flow models
*Options that do not have ATEX. |
|
|
V6 Set Point Charts - Factory Installed Tee |
|
APPROXIMATE
ACTUATION
DE-ACTUATION
FLOW RATES
FOR AIR
Upper
figures are SCFM,
Lower
figures in LPM |
|
Pipe Size |
Actuate |
De-actuate |
|
1⁄2" |
6.50
180
|
5.00
120
|
|
3⁄4" |
10.0
300
|
8.00
240
|
|
1 |
14.0
420
|
12.0
360
|
|
11⁄4"
|
21.0
600
|
18.0
540
|
|
11⁄2"
|
33.0
960
|
30.0
840
|
|
2 |
43.0
1200
|
36.0
1020
|
|
|
|
APPROXIMATE
ACTUATION
DE-ACTUATION
FLOW RATES
FOR COLD WATER
Upper figures
are GPM,
Lower figures
in LPM |
|
Pipe Size |
Actuate |
De-actuate |
|
1⁄2" |
1.50
5.667
|
1.00
3.83
|
|
3⁄4" |
2.00
7.5
|
1.25
4.67
|
|
1 |
3.00
11.33
|
1.75
6.67
|
|
11⁄4" |
4.00
15.17
|
3.00
11.3
|
|
11⁄2" |
6.00
22.67
|
5.00
18.9
|
|
2 |
10.00
37.83
|
8.50
32.2
|
|
Please visit Industrial Process and Sensor for more info.
Back to Product List