Insulated Type J Thermocouple Grade Wire (Information)

Type J Insulated Wire Color Code: Positive, White (Iron); Negative, Red, (Constantan); Overall Brown White Tracer, Extension Grade has Black outer Jacket. Single, Duplex, Cable or Bare.

Type J Insulated Wire Color Code: Positive, White (Iron); Negative, Red, (Constantan); Overall Brown, White Tracer; Extension Grade has Overall Black

Product Specifications

Conductors:

Solid or stranded thermocouple or extension grade wire per
ASTM E230 & ANSI MC96.1

Insulation:

12 Types Available

Construction:

Parallel or twisted conductors

Operating Temperature:

32ºF to 1600ºF ( Dependent on AWG)

Limits of Error

Conforms to ASTM E230, IEC 584
and ANSI MC 96.1

Color Code:

Conforms to ASTM E230 and ANSI MC
96.1 (International Color Codes Available)

Applications

Options

Temperature Sensors

Single Conductors, Duplex or Cable

Power Plants

Metal Overbraids

Transportation

Twisted/Shielded Pair

Cryogenics

Multi-Pair Cables

Petrochemical Plants

Galvanized Half-Oval Armor

FDA Approved...Applications

Insulation and Jacket

Composites

UL Listed Constructions

Aerospace

Calibration Test Reports

Foundries

Kilns

Please see the Product Specifications for more detail.
All Extension Grade Wire rated at 400F except TX and BX which are rated at 212F
The products referenced in the product specifications represent the most popular constructions. Other constructions can be manufactured to meet individual specification and application requirements. Contact factory for additional information
Thermocouple material is normally supplied to meet tolerances above 0C (32F). If material is required to meet
tolerances below 0C (32F), the purchase order must so state. Special selection of material is required.
Suggested initial calibration tolerance. Requirements should be discussed between purchaser and supplier.

Please visit Industrial Process and Sensor for more info.

Back to Product List

Product Specifications
Conductors:	Solid or stranded thermocouple or extension grade wire per ASTM E230 & ANSI MC96.1
Insulation:	12 Types Available
Construction:	Parallel or twisted conductors
Operating Temperature:	32ºF to 1600ºF ( Dependent on AWG)
Limits of Error	Conforms to ASTM E230, IEC 584 and ANSI MC 96.1
Color Code:	Conforms to ASTM E230 and ANSI MC 96.1 (International Color Codes Available)




Applications	Options
Temperature Sensors	Single Conductors, Duplex or Cable
Power Plants	Metal Overbraids
Transportation	Twisted/Shielded Pair
Cryogenics	Multi-Pair Cables
Petrochemical Plants	Galvanized Half-Oval Armor
FDA Approved...Applications	Insulation and Jacket
Composites	UL Listed Constructions
Aerospace	Calibration Test Reports
Foundries
Kilns