|
|
The products listed represent only a small selection of the available IPS product line. To discuss your specific application with an experienced technician.
Please Call 618-465-7623
|
|
Cases and Holsters SKU: FL
BASE PRICE: 0.00
|
You Can Buy This Product Online!
|
Description
|
Image |
Model Number |
Description |
|
C10 |
C10 Holster for 10 and 7 Series (Yellow) Snap-on holster for all Series 10 meters. Absorbs shocks and protects the meter from rough handling. Built-in stand and hanger-loop allow meter positioning. Molded hanger-loop can also function as stationary probe holder, allowing one-handed operation and contact of test points.
|
|
C50 |
C50 Compact Soft Case Vinyl case with belt loop. Holds meter, manual, and leads ready for testing. For 21, 23, 29, 50 and 70 Series without holster. (Use C25 or C90 when using meter with holster.)
|
|
TPAK |
TPAKTM Meter Hanging Kit TPAK is designed to work with:
- 180 Series Digital Multimeters
- 80 Series IV Digital Multimeters
- 70 Series III Digital Multimeters
- 50 Series II Digital Thermometers
- 725 Multifunction Calibrator
- Hang your meter on Belt, on a nail, hook or other object.
- The strong magnet accessory will attach to any metal object
|
|
C100 |
C100 Universal Carrying Case, Tough polypropylene case provides protection against rough handling and bad weather. For any Fluke handheld DMM or Fluke 50 Series thermometers, except the Series 10 and 860 Series, and most Fluke DMM accessories |
|
C510 |
Finally: Cases as tough as your Fluke meter... and cool too!
The C510 Meter Case is specifically designed for Flukes 70 and 20 Series meters but also accommodates most other Fluke meters, from the new top of the line 89-IV to the small, affordable 10 series, as well as a number of Fluke thermometers and process meters.
- Oiled, top grain cowhide for long life
- Heavy duty stitching and riveted construction
- Large belt loop and top flap for securing your meter
- Holds most Fluke DMMs, Thermometers and Process Meters
- Size (H x L x W): 2.25" x 9.25" x 5" (57.15 mm x 234.95 mm x 127 mm)
- Fluke Part No.: 1547885
|
|
C530 |
Leather Accessory Case,
Finally: Cases as tough as your Fluke meter... and cool too!
The C530 Accessory Case can carry all your meter accessories and even has enough room inside for a meter as well. The C530 comes with a heavy-duty top zipper. Each leather case is made in USA and is embossed with the Fluke logo.
- Durable split leather for long life
- Rugged zipper has a convenient leather pull
- Ideal for storing Fluke leads, probes and other accessories
- Even large enough to hold a meter plus accessories
- Size (H x L x W): 1" x 12" x 9" (25 mm x 300 mm x 225 mm)
- Fluke Part No.: 1547904
|
|
|
C550 |
C550 Tool bag,
Finally: Cases as tough as your Fluke meter... and cool too!
The C550 Tool Bag is a large contractor's bag made from tough ballistic nylon and has a steel internal frame. The C550 is weather resistant and comes with handles, shoulder strap and heavy duty hardware. With over 20 inside and outside pockets, the C550 is large enough to conveniently carry several meters, accessories and even your hard tools, including hammers, saws and screw drivers. The C550 comes in the distinctive Fluke yellow and black color and proudly carries the Fluke logo.
- Rugged ballistic cloth with internal metal frame
- Heavy duty hardware includes a removable shoulder strap
- Over 20 inside and outside pockets and a zippered main compartment
- Water resistant
- Ideal for carrying all your Fluke tools and accessories
- Size (H x L x W): 13" x 20" x 9" (325 mm x 500 mm x 225 mm)
- Fluke Part No.: 1547919
|
|
|
C800 |
C800 Hard Storage Case, Smaller than C100. Double seal latches resist popping open if case is dropped. Includes compartments for holding accessories and manuals. Detachable lid for easy storage. Designed for 80 Series meters in holsters. 70 Series and 21, 23, 29, 70 meters in holsters fit loosely.
|
|
C81G |
C81G Holster (Grey), Easy-to-clean, vinyl snap-on holster absorbs shocks and protects meter. Lead and probe storage on back. Unique Flex-StandT allows meter to hang, lean or stand in best viewing position. For 80 Series DMMs |
|
C90 |
C90 Soft Case DMM with Holster, Fabric-backed vinyl case with zippered enclosure. One internal pocket holds test leads or small accessories. Convenient 3" (76 mm) belt loop accommodates tool belts. For use with 8060A and 8062A. Also holds Fluke 21, 23, 29, 50 and 70 Series meters in a C70 holster. Smaller than a C25.
|
|
|
|
|
|
|
|
|
|
|
|
Home
| About | Contact |
Ordering Info |Thermocouples
|
|
©
2003-2009 Industrial Process and Sensor. All rights reserved.
All product names throughout this website are trademarks of their respective holders.
|