|
|
|
|
The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.
Please Call 618-465-7623
|
 |
Flowline FloaTek GP Float Transmitter
|
|
Please Call 1-618-465-7623 for a Quote on this product!
|
|
Description
|
The general purpose two-wire, float transmitter provides contact level measurement up to 8' or 2.4m, and is ideally suited for relatively clean water, light weight oil or diluted corrosive liquids. The transmitter is typically selected for hight temperature and/or pressure process tank applications. Media examples include boiler water and cooking oil.
Specifications
| Range: |
6" to 96" (15.2cm to 2.4m) |
| Accuracy: |
0.25% over span in water |
Specific gravity: |
0.55 minimum |
Orientation: |
± 30° from vertical |
| Supply voltage: |
10 to 30 VDC |
Loop resist.: |
600 Ohms @ 24 VDC |
| Signal output: |
4-20 mA, two-wire |
| Calibration: |
None, fixed span |
| Process temp.: |
F:
-40° to 185°
C: -40° to 85° |
| Pressure: |
200 psi (13.8 bar) |
| Enclosure rating: |
NEMA 4X (IP65) / NEMA 7 |
| Encl. material: |
PP, UL94VO |
| Guide/float mat: |
316 ss |
| Process mount: |
2" NPT |
| Conduit entrance: |
Single, 1/2" NPT |
| Classification: |
General purpose |
| Compliance: |
CE |
|
|
|
Home
| About | Contact |
Ordering Info |Thermocouples
|
|
©
2003-2009 Industrial Process and Sensor. All rights reserved.
All product names throughout this website are trademarks of their respective holders.
|
