About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 6 of 24 >>
Flowline Switch-Pak with Compact Relay Controller, High or Low Detection and Control

Flowline Switch-Pak with Compact Relay Controller, High or Low Detection and Control

Please Call 1-618-465-7623 for a Quote on this product!

This general purpose switch package provides a complete solution for high level spill prevention with a fixed level switch point and 10A compact relay controller for pump or valve actuation. The optional flash alarm brings immediate attention to tank high level conditions. The product is typically selected for corrosive bulk storage, day tank and waste sump applications. Specify the appropriate sensor technology, material and assembly dimension.

6" to 10' (15cm to 3m)
Switch points:
1 (set by factory)
± 30° vertical
Supply voltage:
120/240 VAC @ 50-60 Hz.
Contact type:
(1) SPST relay
Contact rating:
250 VAC @ 10A
Contact delay:
0-60 seconds
LED indication:
Power, relay and
sensor status
Strobe type:
_21_: Xenon tube
_22_: N/a
Strobe flash:
_21_: 1 per second
_22_: N/a
Process temp.:
F: -40° to 176°
C: -40° to 80°
Electronics temp.:
F: -40° to 140°
C: -40° to 60°
AU13/AZ13: 150 psi (10 bar)
AV13: 25 psi (1.7 bar)
Wetted material:
42__: PP
52__: PVDF
Process mount:
_2_3: 2" NPT
_2_7: 1 1/2" G
Enclosure rating:
NEMA 4X (IP65)
Encl. material:
_21_: PP, UL94VO & PC
_22_: PP, UL94VO
Conduit entrance:
Single, 1/2" NPT
General purpose
CE compliance:
EN 61326 EMC
EN 61010-1 safety

Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map