About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 5 of 6 >>
Flowline Thermo-Flo Liquid and Gas Flow Switch

Flowline Thermo-Flo Liquid and Gas Flow Switch

Please Call 1-618-465-7623 for a Quote on this product!

Offered in liquid and gas configurations for low-flow detection, the general purpose flow switch is a great choice for a diverse range of relatively clean, non-coating media. Liquid examples include deionized water and sulfuric acid. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe or ducting from 1/2" to 11/2"; the long sensor is applied in 2" and up. The liquid switch set point may be adjusted from 0.04 to 3 fps, and the gas switch from 1 to 90 fps.

Set point range:
FT10: 0.04 to 3 fps (0.012 to 0.91 mps)
GT10: 1 to 90 fps (0.3 to 27 mps)
± 0.5% of set point
Supply voltage:
12-36 VDC
Contact type:
(1) SPST relay
Contact rating:
60 VA
Process temp:
F: 32° to 140°
C: 0° to 60°
150 psi (10 bar)
Cable length:
10' (3m)
Sensor rating:
NEMA 4X (IP65)
Process mount:
3/4" NPT (3/4" G / Rp)
Sensor material:
PP-Ryton® / PVDF
General purpose

Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map