Flowline Thermo-Flo Liquid and Gas Flow Switch

Offered in liquid and gas configurations for low-flow detection, the general purpose flow switch is a great choice for a diverse range of relatively clean, non-coating media. Liquid examples include deionized water and sulfuric acid. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe or ducting from 1/2" to 11/2"; the long sensor is applied in 2" and up. The liquid switch set point may be adjusted from 0.04 to 3 fps, and the gas switch from 1 to 90 fps.

Specifications

Set point range:	FT10: 0.04 to 3 fps (0.012 to 0.91 mps) GT10: 1 to 90 fps (0.3 to 27 mps)
Repeatability:	± 0.5% of set point
Supply voltage:	12-36 VDC
Contact type:	(1) SPST relay
Contact rating:	60 VA
Process temp:	F: 32° to 140° C: 0° to 60°
Pressure:	150 psi (10 bar)
Cable length:	10' (3m)
Sensor rating:	NEMA 4X (IP65)
Process mount:	3/4" NPT (3/4" G / Rp)
Sensor material:	PP-Ryton® / PVDF
Classification:	General purpose