About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

Product 0 of 5 >>
Fluke 718 m

Fluke Model 718 Pressure Calibrator



SKU: FL
RETAIL: 1,885.00
BASE PRICE: 1,795.00

     You Can Buy This Product Online!    

Description
Fluke 718 Pressure Calibrators

 
Features at a Glance:
  • Built-In Pressure Source and Miliamp Measurement to Calibrate and maintain almost any pressure device
  • Measure pressure, 0.05% of full scale with internal 30 psi/2 bar sensor
  • Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24V loop power
  • Measure pressure 1 to 300 PSI; 1, 30, 100 & 300 PSI Ranges Available
  • 1/8 NPT female pressure fitting
  • Compatible with non-corrosive Gases and liquids
  • Select eleven different engineering units
  • Zero, min, max, and hold functions
  • Calibrate P/I instruments with simultaneous pressure and current measurement
  • Loop Power 24 VDC
  • Pressure switch test function captures set, reset and Deadband values of a pressure switch
  • Long lasting battery life
  • Holster features test lead storage
  • Compatible with toolpack magnetic hanging system

 

Just a note: The 717 Series Pressure Calibrator has an 1/8" NPT pressure port for pressure input.  An external pressure source would be required for a complete pressure calibration setup.

 

The 718 Series Pressure Calibrator has a built-in pressure Pump as well as an 1/8" pressure input port.

 

The 718 Series Pressure Calibrator is available in an Intrinsically Safe Pressure Calibrator. Please CALL 618-465-7623

Accessories


Please Call 618-465-7623 for Information
Click here to view calibrator accessories-pdf

Model
 

Model Number

Pressure Range

Accuracy

718-1G -1 to 1 PSI (-68.9 mbar to 68.9 mbar) 0.0001 PSI
718-30G -12 to 30 PSI (-850 mbar to 2 bar) 0.001 PSI
7178100G -12 to 100 PSI (-68.9 mbar to 7 bar) 0.01 PSI

ALL Fluke-718 Models Include:

Pressure Calibrator. Calibrator includes: C81Y Protective Yellow Holster with Flex-StandTM, Test Leads and Alligator Clips, single 9V alkaline battery, Instructions Sheet (14 languages).

 

 

Choose Options
Please Select Model 
Quantity:
Include a Message to IPS:


Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map