About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 3 of 5 >>

Pressure & Vacuum

RETAIL: 295.00
BASE PRICE: 280.25

     You Can Buy This Product Online!    


Fuel, oil or transmission pressure or engine vacuum.

The PV350 measures gauge pressure; the difference between atmospheric (barometric) pressure and the pressure (or vacuum) applied to the pressure port on the transducer. It then converts that measurement to 1mV dc per unit. The PV350 is compatible with Industrial gases and liquids that are compatible with 316 stainless steel. The DMM has to have input impedance of 10M ohms.

  • Pressure Range: 0.5 to 350 psig (3.447 to 2413 kPa)
  • Vacuum Range: 0 to 29.9 inch Hg (0 to 76cm Hg).
  • Basic Accuracy:
    Pressure: +/- (1% of reading + 0.3 psig)
    Vacuum: +/- (1% of reading + 0.5 inch Hg)
  • Output Signal: 1mV per unit (psi, kPa, cm-Hg, in-Hg)
  • Maximum Working Pressure: 500 psi
  • Pressure Port Connection: ¼ inch NPT male
  • Cable Length: 8 feet
  • Safety Standards: Complies with test pressure requirements of ANSI/ISA S82.03-1988. Protection Class III per IEC 1010-1-1990. Annex H.

Choose Options
Include a Message to IPS:

Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map