About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 13 of 16 >>
Dwyer W E Anderson Flotect V12 series flow switch

W E Anderson Flotect V12 flow switch

Please Call 1-618-465-7623 for a Quote on this product!

Series V12 Flotect? Flow Switch is a low cost, versatile line of switches that can be used in a wide range of applications and configurations. Mountable in any orientation, the Series V12 Flow Switch utilizes a free moving shuttle that is displaced by the liquid flow, activating an isolated, sealed reed switch. Models can be used in media that is compatible with PPE & PS, stainless steel and FEP. Constructed of FDA approved wetted materials.

Service: Compatible liquids.
Wetted Materials: Housing and Shuttle: PPE & PS (Polyphenylene Ether and Polystyrene). PVC with 3/4" NPT option; Spring: 316 SS; Retaining Clip: PH 15-7 MO stainless steel; Magnet: FEP.
Temperature Limits: 0 to 194?F (-18 to 90?C).
Pressure Limit: 100 psig (6.90 bar) @ 70?F (21?C), 50 psig (3.45 bar) @ 194?F (90?C).
Switch Type: SPST normally open hermetically sealed reed switch.
Electrical Rating: 1.5A @ 24 VDC resistive, 0.001A @ 200 VDC resistive, 0.5A @ 125 VAC.
Accuracy: ?20%.
Electrical Connection: 22 AWG, 18" (460 mm) long.
Process Connection: 1" female NPT. Optional 3/4" female NPT.
Mounting Orientation: Switch can be installed in any position but the actuation flow rates are based on vertical up flow pipe runs and are nominal values.
Set Point Adjustment: None.
Weight: 4.2 oz (0.119 kg).
Deadband: 20% maximum.
Agency Approvals: UL.

Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

? 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map