About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 12 of 12
Flowline Commander Multi-Channel Relay Controller

Flowline Commander Multi-Channel Relay Controller

Please Call 1-618-465-7623 for a Quote on this product!

The general purpose controller has a graphic display with four 4-20 mA transmitter input channels and 6 programmable relays. Select from one of three run mode configurations including 1) Multi-tank with 4 inputs and 4 relays; or 2) Pump control with 1 input and 6 relays for lift stations including duplexing; or 3) Differential level with 2 inputs and 4 relays for municipal screen or rake control. Each relay can be configured on a single set point or latched on two set points for automatic fill or empty control. The LCD displays engineering units, relay and span status for each channel. The MicroSD card is ideal for data-logging storage and retrieval.

3.7" x 3.7" x 2.5"
12.5 oz (0.354 kg)
3.622" x 3.622"
Max panel thick:
5 mm
Supply voltage:
10-30 VDC
Num. of channels:
Input ranges:
4-20 mA
Num. of outputs:
6 relays
Mechanical contact
Num. of commons:
Max. output current:
3A at 250 VAC resistance
Max. output voltage:
275 VAC, 30 VDC
Max. switched power:
1250 VA, 150 W
Oper. temp.:
F: 32° to 122°
C: 0° to 50°
F: 32° to 122°
C: 0° to 50°
Enclosure rating:
Rel. humidity:
5 to 95% non-condense
Intern. memory:
256 KB
Opt. memory card:
Up to 1 GB
Logic scan rate:
1.2 mS/K
Graphics / text:
Display technology:
Backlit LCD
Pixels count:
128 x 64
Terminal type:
Screw type, 5 mm rem.

Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map