Flowline Switch-Pak with Compact Relay Controller, High or Low Detection and Control

This general purpose switch package provides a complete solution for high level spill prevention with a fixed level switch point and 10A compact relay controller for pump or valve actuation. The optional flash alarm brings immediate attention to tank high level conditions. The product is typically selected for corrosive bulk storage, day tank and waste sump applications. Specify the appropriate sensor technology, material and assembly dimension.

Specifications

Length:	6" to 10' (15cm to 3m)
Switch points:	1 (set by factory)
Orientation:	± 30° vertical
Supply voltage:	120/240 VAC @ 50-60 Hz.
Contact type:	(1) SPST relay
Contact rating:	250 VAC @ 10A
Contact delay:	0-60 seconds
LED indication:	Power, relay and sensor status
Strobe type:	_21_: Xenon tube _22_: N/a
Strobe flash:	_21_: 1 per second _22_: N/a
Process temp.:	F: -40° to 176° C: -40° to 80°
Electronics temp.:	F: -40° to 140° C: -40° to 60°
Pressure:	AU13/AZ13: 150 psi (10 bar) AV13: 25 psi (1.7 bar)
Wetted material:	42__: PP 52__: PVDF
Process mount:	_2_3: 2" NPT _2_7: 1 1/2" G
Enclosure rating:	NEMA 4X (IP65)
Encl. material:	_21_: PP, UL94VO & PC _22_: PP, UL94VO
Conduit entrance:	Single, 1/2" NPT
Classification:	General purpose
CE compliance:	EN 61326 EMC EN 61010-1 safety